Nanotechnology based water repellent without organic solvents, environmentally friendly. Seals and protects
cement, cement slabs, mortars, expansion joints, ceramics, bricks, unpolished marbles and granites, as well as many other stones, natural and artificial, from water, natural dirt, coffee stains etc. It minimizes the water absorbency of the surface while it allows the surface to breathe, without altering the color of the stone. It does not create film and doesn’t yellow. A long lasting protection with high resistance in extreme weather conditions. It is suitable for both indoor and outdoor applications.
CERAMICS & TILES
7 – 20 m2/L Depending on the absorbency of the surface.
The consumptions are indicative and refer to a single coating of the product. To increase the duration of the treatment it is advised a mild detergent such as AP-302 for the daily cleaning.
Density at 20°C:
pH (at 25°C):
Stored at temperatures from 3°C to 30°C.
ISO ΕΝ 1925– Determination of water absorption coefficient by capillarity (98% decrease in absorbency)
Always make sure that the application area is suficiently ventilated. On a well cleaned and dry surface apply the liquid undiluted with a brush or spray in one or more layers, buy spreading evenly any residues of liquid. The second coating must be applied as long as the surface is still wet. Any remaining residues can be removed after the surface has dried.
The surface can be used after six hours, while the maximum protection is achieved after the full curing of the material. For the complete curing of the material 48-72 hours are required depending on humidity and weather coionditions.