Water repellents

AP-105 STONE WATER REPELLENT

PACKAGES:0.75L5L20L
DESCRIPTION

Water repellent and stain protector, which enhances the natural colorings of the stone. Suitable for marbles,

granite, stone, bricks, ceramics, cement. Protects surfaces from water, coffee, dirt etc. It doesn’t create a film, it penetrates deep into the marble pores and seals them making the surface to repel water and other liquids. After the application of the water repellent, the stains can be easily cleaned, since their penetration into the marble pores is prevented. It has a mild odor. It doesn’t affect the breathability of the stones while it protects them from surface cracks, salts and damage caused by frost.

USED IN:
  • MARBLES
  • GRANITES
  • NATURAL STONE
  • CERAMICS & TILES
  • POROUS STONES
  • LIMESTONES
  • CONCRETE
  • MOSAICS

TECHNICAL SPECIFICATIONS

CONSUMPTION

12 – 25 m2/L Depending on the absorbency of the surface.

Consumptions are indicative and referred to a single coating of the material.

Format: Liquid
Color: Transparent
Odor: Solvent
Density at 20°C: 1.3 g/cm3
pH (at 25°C): N/A
Flash point: N/A
freezing point: 0°C
Stored at temperatures of 3°C to 30°C.
ISO ΕΝ 1925 – Deterrmination of water absorption coefficient through capillarities ( 98% reduction of water absorption)

 

INSTRUCTIONS

Please read the label carefully. Always make sure the application space is sufficiently ventilated. On a well cleaned and dry surface apply the liquid undiluted with a brush or spray in one or more layers, while spreading any liquid residues.
The second coating must be applied after 5 to 10 minutes, while the surface is still wet. Any possible remaining solid residues can be removed after 1 hour. If the residues remain for a longer time they can be removed with a cloth slightly soaked with the product.
The brush or the roller can be cleaned with white spirit after the end of the application. The surface can be used after two to three hours while the maximum protection is achieved after the full curing of the product. For the complete curing of the product 24 – 48 hours are required depending on the humidity and weather conditions.