Transparent water based impregnating varnish for stones and artificial construction materials. Composition
of hybrid polyurethane with very high abrasion and weathering resistance. Contains UV filters for protection against UV radiation, non yellowing and non chipping. It is suitable for the protection and decoration of natural stone, granite, stone slabs, Malta tiles, porous stones, cement, Mosaics, bricks, etc. of indoor and outdoor sufaces. Protects against moisture and penetration of pollutants. While also from cracks caused by frost.
CERAMICS & TILES
10 – 12 m2/L Depending on the absorbency of the surface.
Consumptions are indicative and referred to a single coating of the material.
Density at 20°C:
pH (at 25°C):
Stored at temperatures of 3°C to 30°C.
Maximum V.O.C. content: / Μεγ. περιεχόμενο σε Π.Ο.Ε.: 98.86 g/L (20 ºC) EU limit for the product (Cat. A.L Επιχρίσματα διακοσμητικού αποτελέσματος): / Οριακή τιμή της Ε.Ε. για το προϊόν (Κατηγ. A.L Decorative effect coatings): 200 g/L (2010)
Before the application, try the product on a small surface to see if you have the desired results and determine the ease of application. On a well-cleaned and dry surface apply the liquid without thinning, with a brush, air pistol or roller. After about 2 hours you can apply a second coat depending on the desired effect. Avoid usage at temperatures below 10°C and under very intense sunshine. After the application, you can clean the tools with hot water.