Adhesives - Marble putties

SHARE

POLYEPOXY PUTTY

PACKAGES:1L4L10L
DESCRIPTION

Thixotropic (putty) for marble, granite, stone, limestones. With very strong bonding ability. Provides optimal

bonding on more surfaces such as technomarble, plastics, wood etc. It has low viscosity for easy application to vertical surfaces and small fillings, high water resistance and chemical resistance, as well as weather and temperature resistance. The final product delivers excellent shine after polishing.

USED IN:
  • MARBLES
  • GRANITES
  • NATURAL STONE
  • CERAMICS & TILES
  • POROUS STONES
  • LIMESTONES
  • CONCRETE
  • MOSAICS
  • PLASTICS

TECHNICAL SPECIFICATIONS

Color:  White, Beige, Gray
Viscosity (25°C): 250000-380000 mPas
Density at 20°C:  1.7 gr/cm3
Gel-time (25°C):   5 min
Glue/hardener ratio:  100/2
Flash point: 15 °C
Freezing point: -2 °C
.
Tensile strength
Tensile modulus:  5800 Mpa
Tension at break:  37 MPa
Deformation at break:  0.3 %
.
Flexural resistance
Flexular modulus:  6600 Mpa
Tension at break:  56 Mpa
.
Stored at temperatures from 3 °C to 30 °C.

INSTRUCTIONS

The surface to be glued must be dry and clean. Prior mixing with the catalyst the glue may be colored with dyes to match the color of the stone. Remove the required amount of glue from the container and mix it with 2% but not more than 3% hardener. Do not return the mixed material with the hardener to the container. Cure time 5 minutes at 25 ° C. Keep the container tightly closed in a cool place at about 20 ° C. At high temperatures the cure time is accelerated while at lower temperatures it slows down.

Ensure that the application area is always sufficiently ventilated. The tools can be cleaned with alcohol or acetone