Products > Polishing - Protection > Water repellents > AP-101 WATER REPELLENT
CATEGORIES(+)

Water repellents

Technical Sheet
SHARE

AP-101 WATER REPELLENT

PACKAGES:0.75L5L20L
DESCRIPTION

Siloxane based oil and water repellent, anti stain protective impregnation. Suitable for marble, granite, stone,

bricks, ceramic, cement and non-glazed cedramic tiles. Protects the surface from water, oil, coffee, stains from mustard, sauces, etc. It doesn’t create a film, it penetrates deep into the pores of the marbles and seals them, making the surface to repel water, oil and other liquids.

After the application of the water repellent, stains can be cleaned easily, since their penetration in the pores of the marble is prevented. It has a mild odor. The breathability through the pores of the stone is not prevented. It protects from superficial cracks, salts and damage caused by frost.

USED IN:
  • MARBLES
  • GRANITES
  • NATURAL STONE
  • CERAMICS & TILES
  • POROUS STONES
  • LIMESTONES
  • CONCRETE
  • MOSAICS

TECHNICAL SPECIFICATIONS CONSUMPTION 7 – 20 m2/L Depending on the absorbency of the surface. The consumptions are indicative and referred to a single coating of the material. For the protection of the treatment the surfaces should be cleaned with a mild detergent such as the AP-302.  

Form: Wet
Color: Transparent
Smell: Mild
Density at 20°C: 0.8 g/cm3
pH (at 25°C): N/A
Flashpoint: 40 – 46°C
freezing point: -12°C
Store at temperatures from 3°C to 30°C.
EN ISO 10545-14 determination of resistance to accidental staining (Classification 5)
ASTM E514 resistance to rain, wind.

 

INSTRUCTIONS

Please read the label carefully. Always make sure the application space is sufficiently ventilated.
well cleaned and dry surface apply the liquid undiluted with a brush or spray in one or more layers, while spreading any liquid residues.
The second coating must be applied after 5 to 10 minutes, while the surface is still wet. Any possible remaining solid residues can be removed after 1 hour. If the residues remain for a longer time they can be removed with a cloth slightly soaked with the product.
The brush or the roller can be cleaned with white spirit after the end of the application. The surface can be used after two to three hours while the maximum protection is achieved after the full curing of the product. For the complete curing of the product 24 – 48 hours are required depending on the humidity and weather conditions.