Two component Liquid epoxy resin, for marble slabs reinforcement. It is also suitable for the mesh
reinforcement of the rear face of the marbles. It is also usefull for the treatment of the front side of the marbles and for the filling of small cracks. It demonstrates very high resistance to yellowing and very high mechanical and chemical resistance. Because of its excellent transparency and mechanical properties it can also be used for boxing and other crafts, while also for the coating of other materials, such as concrete, other stones and wood.
CERAMICS & TILES
Density at 20°C:
pH (στους 25°C):
60 min (25°C)
Gel time 4 – 6 min (25°C)
3 – 6 min (25°C)
20 h (25°C)
Full curing time
2 h (25°C)
Lap shear strength:
Stored at temperatures from 3 °C to 30 °C.
Please read the label carefully. Before each use, apply the product on a small area to determine the ease of application and if you have the desired results. Make sure that the surface is clean and free of waxes or other coatings.
Take equal quantities of material from the A and B part. Mix thoroughly with a spatula for about 1 minute until the mixture has a uniform color. Then apply the mixed material on the surface to be bonded. The surface to be bonded must be dry and clean.
Do not return the mixed material in the containers and don’t bring into contact the material into the containers with each other.
Make sure that the application space is always sufficiently ventilated. The tools can be cleaned with alcohol or acetone