Epoxy

APOLLOPOXY S

PACKAGES:0.5L5L10L

DESCRIPTION

Two component epoxy adhesive. Suitable for vertical slabs installations, gluing of slabs on cement, plaster,

metal and other. Installation of marble facings, anchors, anchorages, bonding of concrete elements. Multiple adhesion strength from other conventional adhesives.

USED IN:

MARBLES
GRANITES
NATURAL STONE
CERAMICS & TILES
POROUS STONES
LIMESTONES
CONCRETE
MOSAICS

TECHNICAL SPECIFICATIONS

CONSUMPTION

Form:	Paste
Color:	White
Odor:	Mild
Density at 20°C:	1.54 gr/cm3
pH (at 25°C):	N/A
Flash point:	100°C
Freezing point:	-10°C
.
Pot life	35 min (25°C)
Gel time 4 – 6 min (25°C)	45 min (25°C)
Hardening time	2 h (25°C)
Full curing time	24 h (25°C)

Tensile strength:	24 MPa
Lap shear strength:	9.6 MPa
Compressive strength:	75 MPa
Shear strength:	14.5 MPa

.
Stored at temperatures from 3 °C to 30 °C.

INSTRUCTIONS

Please carefully read the label. Before each use, apply the product on a small area to determine the ease of application and if you have the desired results. Make sure that the surface is clean and free of waxes or other coatings.

Take equal quantities of material from the A and B part. Mix thoroughly with a spatula for about 1 minute until the mixture has a uniform color. Then apply the mixed material on the surface to be bonded. The surface to be bonded must be dry and clean.

Do not return the mixed material in the containers and don’t bring into contact the material into the containers with each other.

Make sure that the application space is always sufficiently ventilated. The tools can be cleaned with alcohol or acetone