Products > Polishing - Protection > Polishing - Protection > AP-110 POLYURETHANE VARNISH
CATEGORIES(+)

Polishing - Protection

Technical Sheet
SHARE

AP-110 POLYURETHANE VARNISH

PACKAGES:0.75L5L10L
DESCRIPTION

Transparent water based impregnating varnish for stones and artificial construction materials. Composition

of hybrid polyurethane with very high abrasion and weathering resistance. Contains UV filters for protection against UV radiation, non yellowing and non chipping. It is suitable for the protection and decoration of natural stone, granite, stone slabs, Malta tiles, porous stones, cement, Mosaics, bricks, etc. of indoor and outdoor sufaces. Protects against moisture and penetration of pollutants. While also from cracks caused by frost.

USED IN:
  • MARBLES
  • GRANITES
  • NATURAL STONE
  • CERAMICS & TILES
  • POROUS STONES
  • LIMESTONES
  • CONCRETE
  • MOSAICS

TECHNICAL SPECIFICATIONS

CONSUMPTION

10 – 12 m2/L Depending on the absorbency of the surface.

Consumptions are indicative and referred to a single coating of the material.

 

Form:liquid
Color:white
Smell:Mild
Density at 20°C:1 g/cm3
pH (at 25°C):7
Flash point:N/A
freezing point:-5 °C
Stored at temperatures of 3°C to 30°C.

 

Maximum V.O.C. content: / Μεγ. περιεχόμενο σε Π.Ο.Ε.: 98.86 g/L (20 ºC) EU limit for the product (Cat. A.L Επιχρίσματα διακοσμητικού αποτελέσματος): / Οριακή τιμή της Ε.Ε. για το προϊόν (Κατηγ. A.L Decorative effect coatings): 200 g/L (2010)

INSTRUCTIONS

Before the application, try the product on a small surface to see if you have the desired results and determine the ease of application. On a well-cleaned and dry surface apply the liquid without thinning, with a brush, air pistol or roller. After about 2 hours you can apply a second coat depending on the desired effect. Avoid usage at temperatures below 10°C and under very intense sunshine. After the application, you can clean the tools with hot water.