Self polishing floor finish for marble, cotto, tiles, paver stones and granites. It protects the floors with heavy
traffic. It is ideal for the protection and polishing of unpolished marbles and granites. It creates a protective film witch provides a very shiny non yellowing polish that adheres extremely well on surfaces. It doesn’t slip and it doesn’t require buffing. It can also be used for the repair of the finish of old worn marbles, for the polishing of the edges of floors, marble tables counter tops. For even more protection the surfaces can be protected with AP-102 prior to its application.
CERAMICS & TILES
12 – 15 m2/L Depending on the absorbency of the surface.
Consumptionsa are indicative and referring to a passage of the material.
Density at 20°C:
pH (at 25°C):
Stored at temperatures of 3°C to 30°C.
Before the application, try the product on a small surface to see if you have the desired results and ease of application. On a well-cleaned and dry surface, apply the liquid with a cloth. After about 2 hours you can apply a second coating following vertical movements to those of the first coating. Avoid usage at temperatures below 10 ° C and under very intense sunshine. After application, you can clean the tools with hot water. For greater protection, you can waterproof the surface with AP-102 before the application. For the maintenance of the surface you can use a mild soap like AP-302 or AP-309. The treatment can be further maintained by moping the floor with two cups of AP-206 diluted in a backet of water.