Products > Polishing - Protection > Polishing - Protection > AP-207 POLISHING WAX PASTE
CATEGORIES(+)

Polishing - Protection

Technical Sheet
SHARE

AP-207 POLISHING WAX PASTE

PACKAGES:0,25L0,75L
DESCRIPTION

Solid wax paste for the polishing of any type of stone. It can be used for the polishing of vertical surfaces

where the usage of liquid polishers is difficult. It is suitable for the polishing of the corners and edges of marbles, granites, travertine, tiles and Mosaics, and other surfaces where the usage of polishing machines is difficult. It enhances the color of the stone. Thanks to the ease of its application it can be used on vertical and uneven surfaces, as also on many different stone constructions. The product can be applied on any type of stone that has been polished over the grit number 400 to achieve the best possible results. The surface becomes hydrophobic and gains a resistant non yellowing polish.

USED IN:
  • MARBLES
  • GRANITES
  • NATURAL STONE
  • POROUS STONES
  • LIMESTONES
  • CONCRETE
  • MOSAICS

TECHNICAL SPECIFICATIONS

CONSUMPTION

25 – 30 m2/L Depending on the absorbency of the surface.

Consumptions are indicative and referring to a passage of the material.

 

Format: Solid paste
Color: translucent
Smell: Solvent
Density at 20°C: 1.3 g/cm3
pH (at 25°C): N/A
Flash point: N/A
freezing point: 0°C
Stored at temperatures of 3°C to 30°C.

 

INSTRUCTIONS

Read the label carefully. Before each use, apply the product on a small area to determine the ease of application and if you have the desired results. Make sure that the surface is clean and free of waxes or other coatings.

Assure that the application space is adequately ventilated. In a cleaned and dry surface apply the paste evenly with a cloth. (Surfaces must be clean and free of dust). Leave the surface to dry for 5 to 10 minutes, depending on the temperature. If the stone is very porous or not sufficiently polished a second coat can be applied 20 minutes after the first coat. To achieve a very high level of polish buff the surface with a fine steel wool (No. 1) and if you preffer afterwards a soft cloth. It is also possible to polish the stone using a polishing machine ( MAX. 2000 p. a. ee) equipped with a buffing disc.