Products > Polishing - Protection > Water repellents > AP-103 WET LOOK
CATEGORIES(+)

Water repellents

Security Data Sheet
SHARE

AP-103 WET LOOK

PACKAGES:0,75L5L20L
DESCRIPTION

Water repellent impregnation which enhances the natural tones of the stones. Seals and protects polished and

unpolished marbles, granites and all natural and artificial porous stones, from oils, water, mustard stains, coffee etc. It minimizes oil and water absorbency of the surface, while at the same time it gives the look of a wet surface. The stone remains breathable. Demonstrates high weathering resistance and withstands extreme weather conditions. It is suitable for both indoor and outdoor applications. It is a non yellowing and non film forming impregnation.

USED IN:
  • MARBLES
  • GRANITES
  • NATURAL STONE
  • CERAMICS & TILES
  • POROUS STONES
  • LIMESTONES
  • CONCRETE
  • MOSAICS

TECHNICAL SPECIFICATIONS

CONSUMPTION

7 – 20 m2/L Depending on the absorbency of the surface. The consumptions are indicative and referred to a single coating of the material.

For the protection of the treated surfaces a mild cleaner as AP-302 should be used for the daily cleaning.

 

Form: Liquid
Color: Transparent
Smell: Soft
Density at 20°C: 0.8 g/cm3
pH (at 25°C): D/E
Flashpoint: 40 – 46°C
freezing point: -12°C
be kept at temperatures of 3°C to 30°C.
EN ISO 10545-14
DETERMINATION OF RESISTANCE TO SMUDGING. (Classification 5)
ASTM E514
resistance to rain, wind.

 

INSTRUCTIONS

Please carefully read the label. Before each use, apply the product on a small area to determine the ease of application and if you have the desired results. Make sure that the surface is clean and free of waxes or other coatings.

Make sure the working space is always sufficiently ventilated. On a well cleaned and dry surface apply the liquid undiluted with a brush or spray. Apply one or more coats by spreading any residues of liquid. After 15 minutes wipe any possible solid remaining residues or any residual liquid that hasn’t been absorbed.

The second coating must be applied 15 minutes after the surface has dried. Any possible remaining solid residues can be removed after 30 minutes. In case that residues stay on the surface uncleaned for a longer period they can be removed with a cloth slightly soaked with the liquid.

The surface can be used after six hours, while the maximum protection is achieved after the full curing of the product. The complete curing of the product takes 24-48 hours depending on the humidity and weather conditions.
The tools can be cleaned with water or with a mild detergent.